fully 3D printable name tag (print in place)

sometimes I hate it when a model requires extra stuff like magnets to be assembled. To complete this model, you are only in need of a single piece of paper (which shouldn't be that hard to find). 

How it works:

print the parts! Make sure that you set up your slicer as the picture shows above or just use the g- code I already prepared. After it's finished remove the support material and prepare a piece of paper or thin cartonnage (19mm*49mm). Write anything on it and put/glue it on the slider. Then slide the slider into the base. After that make sure that the clip joint moves freely.

Attention:

Your printer should pass Clearance tolerance test 0.20mm! https://www.printables.com/model/116911-clearance-tolerance-test

Hope you like it! If you got questions or feedback in any way please feel free to text me via printables or write it in the comments!