June 13, 2022
Description
Ultimaker 2 simple front panel and could be stored on the printer side
Requirement:
-Glue (I just used hot glue)
-1.8mm acrylic or plexiglass (325mm x 315mm)
Tip: Hold the acrylic panel in place with masking tape then apply glue to the brackets
This design is inspired by Ultiarjan Ultimaker2 minimalist front panel https://www.thingiverse.com/thing:581159
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: General ASA-ABS-PETG Any Color
Notes:
The side tabs might need some filing and cleaning as needed to hold the panel properly.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
1D_Design
