BMW logo keychain with name (multicolor)

On the internet i've found several BMW logo's to print and also some as keychain but not how i wanted it.

I've made this model with different layers for each color so it can be printed in multicolor with filament changes at different layers. No need for the multi-material upgrade!

As i also want to identify my car keys from my wife her car keys i wanted to put some names on it.

The photo is with normal font and size 4mm of the name, as i think it is still a bit too small i've modified the model to a bolt font and 5mm size. The model is made in Fusion 360.

Feel free to modify the model and share other names you print :-)

In the sketch called “NAME” you can change the name (and if needed the angle of the tekst)

The color changes are at the next heights:

up to 3.00mm use black

from 3.20mm  to 3.40mm use white

from 3.60mm to 3.60mm use blue (one layer)

from 3.80mm to 4.20mm use silver (or white if you like)

above 4.4mm use black again