February 17, 2023
Description
This is mostly a cosmetic remix of darkspoon's latch cover. (I think the retention clips might be a little stronger. See below.) The corners and edges have had fillets and rounds added to give a smoother appearance and feel. The internals and critical dimensions are untouched.
Works on my Kennel Cab II. Should also work on Kennel Cab.
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
30%
Filament: Overture PLA Black
Notes:
Four walls, four top and bottom layers. Printed flat on it's face. It took a little "persuading" with some soft jawed channel locks to get the second side to snap on but I didn't have any breakage like darkspoon described. The radius on the rod clearance notch minimizes the stress riser on the tab with the latch, which probably helps a lot with that problem.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
AlanR1138
