Arturia MiniFuse Audio Controller Under Desk Mount

This bracket is specifically designed to allow the user to mount a MiniFuse audio controller under their desk. It requires 2x  2x10mm self tapping screws to mount into the desk if the desk is solid wood. You will likely need something longer for mdf construction desks. I have tested this on a Fully Bamboo desktop and its solid as a rock. I imagine you will need to use some slightly different mounting hardware for softer or composite construction. 

You will need to print two of these brackets out one for the front and one for the back, the rubber feet are designed to go into the divots and this is what holds the device into place. There is a small amount of head room in order to be able to remove the device from the mount if needs be. Just lift it up out of the divots and it will come out with a bit of persuasion. 

Whilst specifically designed for this audio controller you may be able to use this bracket for another similar designed model. The bracket is designed for a device 40mm high and 155mm wide.

This model is presented as is, I accept no responsibility for damage to your equipment should you choose to use this mount.