January 15, 2023
Description
A simple lamp shade for the BLF/Sofirn LT1 lantern.
There are two versions available:
v1: My original idea, but my printer struggled with the 60° overhang at 0.2 mm layer height.
v2: Slightly different design with a maximum overhang of 50° which worked fine.
Initially I designed a complex mount with springs and moving parts. This turned out to be overengineered and unnecessary. This simple solution is enough.
The shade should be printed with 3 perimeters using a 0.4 mm nozzle. You can adjust the thickness easily in FreeCAD.
Apropos FreeCAD: Version 0.19 is required to open the files.
Category: ToolsLicense:
Creative Commons — Attribution — Noncommercial — Share Alike
8
SammysHP
