February 19, 2023
Description
LIKE - SHARE - COMMENT
Lean design, fast print, hole pattern is 40x50mm, print orientation is shown on the photo (for optimal support generation-zigzag). For table / shelf installation.
Slicer shows 45min for this print with:
0.8 nozzle and
0.32 layer height
30% infill
1 wall pass
2 bottom and top pass
it could be less on higher feeds and layer height
my other designs
https://www.printables.com/social/296116-the-sloppy-apprentice/models
https://www.thingiverse.com/thesloppyapprentice/designs
Take a look at my youtube channel:
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
The Sloppy Apprentice
