CR10s-Pro Filament Guide - EASY CLIP-ON - screw on - z-sync version

..first thks to ToddsWorld for the great design...
I was using his design for all my stock CR-10s Pro, but when I started to add z-syn or even frame bracing, I needed to alter the design and finally decided to do a complete makeover.
Whats new:
You will get two clips:

• Clip.stl is for regular setup, which means the z-syn pulley is installed below the top lead screw anti wobble bracket.
• Clip_flipped_Bracket.stl is for a twisted bracket where you can mount the pulley on top not to loose any z height (check out details here https://www.printables.com/model/229079-cr-10s-pro-v1-cr-10s-pro-v2-and-cr-10-max-maintena)

a screw on mount if you are using frame bracing:

• Screwon_Mount.stl
   

a completely new loopeye which can also be done in a 2 pcs. print for better strength of the arm (glue required for assembly):

• Loopeye_V3.stl
• Loopeye_only.stl 2 pcs. print
• Loopeye_Arm_only.stl 2 pcs. print, print with support in the model orientation in order for the layer lines to be oriented where the bending force will be applied