Pac-Man & Ms.Pac-Man Inspired Coaster Set (No AMS or MMU required)

The Pac-Man & Ms.Pac-Man Custom Coaster Set!

Featuring the iconic Pac-Man maze and the four varying Ms.Pac-Man mazes!

You can always get creative and use different colors to make the alternate colored mazes. ie. Pac-Man Plus, The alternate colored Ms.Pac-Man mazes, or make them with your own colors.

Each one will take a little less than 5 hours to print on average.

NOTES:

• The .3mf files should be ready to be used with Prusa Slicer with the pauses already in place. Just make sure detect thin walls/print thin walls is on when printing with dots.
• If using Cura or any other slicer, be sure to check around the power pellets/big dots before printing.

Nozzle:

• 0.4mm with 0.16mm layer height works.

Infill:

• 15-20% with Gyroid pattern is preferred especially with the dots. 

Pauses With dots models:

1. 4.70mm (from the base color, change to the dot color)
2. 5.75mm (from the dot color, change to background color)
3. 6.50mm (from background color to maze wall color)

Pause Without dots models:

• Pause at 6.50mm (from background color to maze wall color)

Colors (game accuracy):

• Pac-Man: Black background, Yellow dots, Dark blue maze wall.
• Ms.Pac-Man 1: Black background, White dots, Pink maze wall.
• Ms.Pac-Man 2: Black background, Yellow dots, Light blue/Cyan maze wall.
• Ms.Pac-Man 3: Black background, Red dots, Orange/Brown maze wall.
• Ms.Pac-Man 4: Black background, White dots, Dark Blue maze wall.

Have fun and share your makes!