June 21, 2022
Description
Created a side mount for a small LED strip. I designed this to add light for my raspi camera that is mounted on the gantry stepper motor.
Quick and Easy to print and setup. Prusament Orange PETG Filament and recommended 50% infill for rigidity otherwise 20% is fine. Mounts with the existing front plate screws to the extrusion beams.
Notes: The LED Strip used was a typical 12Volt 5050 SMD. Cut to size and solder on the positive and ground leads. I'd suggest using a high density LED strip and to lower the power. The LED's are somewhat overkill at 100%. The webcam photo in the gallery shows how bright they are.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Recon Halcyon
