Hygrometer sensor faceplate

This plate is designed for a popular type of sensor used in filament airtight boxes (shoutout to thing:1332650 !). There are many clones; this is the one I happened to have when designing this: https://www.amazon.com/gp/product/B07GR67G1M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

The plate is meant to hold the sensor right up to a transparent surface, from the inside of the filament container (see pics).

After printing, insert the sensor body into the plate, aligning the sensor's little side tabs with the notches in the plate. Once the sensor is all the way into the countersink hole and flush with the top face of the plate, push on the sensor's tabs and twist the sensor to the orientation of your liking.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament: Hatchbox PLA Orange

Category: 3D Printer Accessories