Mandalorian - This is the way 2D wall art (Remix - stacked)

June 20, 2022

Description

This is a simple remix of dtm2477's piece here (https://www.thingiverse.com/thing:4062243). I printed the two halves separately and super glue'd them together, but you could achieve the same effect by stacking the models and changing filament during printing.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Resolution:

0.2

Infill:

20%

Filament: Matteforge, Hatchbox PLA Black, White

Notes:

I printed the bottom half with 3 top and bottom layers, but in retrospective I'd recommend at least 4 top layers to prevent the infill from showing through.

For the print in the picture, I scaled both parts up by 115% in the xy directions (not z), and rotated counter clockwise by 45 degrees to fit on an [Ender 3](https://www.amazon.com/Official-Creality-3D-Removable-220x220x250MM/dp/B07K3SZBHJ?dchild=1&keywords=ender+3&qid=1612857257&sr=8-1-spons&psc=1&linkCode=ll1&tag=thingiverse09-20&linkId=5419ace64a5f58b068a896710257ed13&language=en_US&ref_=as_li_ss_tl) / 3 Pro bed.

Category: Art

License:

Creative Commons — Attribution