Tool Inlet with labels

Here is the inlet for the holder “Wera Kraftform Kompakt VDE", which I also constructed. This inlet is freely customizable only the individual parts must be combined. You can print the symbols and labels which you need and insert them. I use a normal glue. The files are available as STEP and as 3mf. 
This insert has no symbols or labels. Instead, there is another insert that can be equipped accordingly.

I printed the carrier with PLA+ from Eryone with 15% infill. Support is not needed. 

My prints are with two colours. The base I print with 0.2mm red and the symbols / letters with 0.1mm white layer height. 
- The layer height for changing the colour is at 1.9mm for the labels.
- The layer height for changing the colour is at 2.6mm for the symbols. The symbols need build plate support!

I have included an example with 14 squares as a finished print object.

Inletholder:
https://www.printables.com/model/228466-wera-kraftform-kompakt-vde-holder