November 11, 2022
Description
Handle length is 200mm and you can extend it up to 340mm. I printed flap with TPU filament and other parts with PLA. I printed rod and locking nut 0.16mm layer height and other parts with 0.2mm. I made threads 10mm long for more strength. If the threads don't want to move freely you could what's over your e-steps. Initial layer settings must be the same as other layers to prevent elephant foot. The flap needs support and handle use only supports for buildplate. The inside support is already added.
You can watch how to assembly it at:
License:
Creative Commons — Attribution — Noncommercial — Share Alike
3DPrints&Builds
