MMS Swivel Mounts

Upon request, I've modeled the first version of the MMS Swivel Mounts! Use these to modify the angle at which your MMS Modules are mounted! This is designed to work with the MMS Modular Belt Collection specifically, but like the rest of the collection, can work with just about any other module i've posted!

You'll need some hardware for this; a bolt and nut that fits and can squeeze down on the circular plates. Loosening the bolt allows you to change the angle, tightening holds it. I recommend using a wing nut or something similar for this!

PRINT THESE CLOSE TO 100% INFILL AND HOT.

These are specifically designed to work with the MMS Belt Modules!
-=|MMS Belt Modules!|=-
https://www.printables.com/social/280626-hellforge-actual/collections/179340 

These Pins will help you mount!
-=|MMS Quick Release Pins!|=-
https://www.printables.com/model/213156-mmspicatinny-quick-release-pins 

The rest of the MMS Collection You Can Use With This!
-=|Moonbeam Mounting System Collection!|=-
https://www.printables.com/model/213156-mmspicatinny-quick-release-pins

Moonbeam Mounting System is a collection of designs intended to bring complete and absolute modularity to anything you desire! Projects to upgrades, convenience to convention. You can make anything imaginable modular! Mounting and modifying where your item is mounted is a matter of mere seconds and a few movements. MMS got started in highschool competition robotics, used to be able to swap out bot parts in seconds in the event one got damaged. Its as simple as popping a pin, moving things around and you have a completely different setup! The only limiting factor is your imagination. So get yourself some modules. Life changing modularity awaits!