Nintendo Switch compact Dock

A compact case for the Switch Dock Mainboard based on the Switch Dock Dongle Mod mk2.5 by fooboy. For this case you can reuse the screws from the original case and I've removed the protective lip around the connector so that you can directly stick it into the console as I could not find a cable that actually had all the data pins wired up. I’ve also simplified the geometries of the holes for ports, fixed the positions for some of the holes that were a little bit off and removed the thread models from screw holes.

You might find this guide helpful for getting the circuit board out of your dock.

Please note that the type c connector on the dock is not omnidirectional. If the dock doesn’t do anything after you’ve plugged it into the console it’s very likely that you just need to plug it in the other way. The original case has a little feature to prevent incorrect plug insertion, but I didn’t care to model it as plugging it in the wrong way doesn’t break anything and it isn’t a huge bother to me.