June 21, 2022
Description
This is a bracket and non-invasive shelf mount that allows you to mount your Yaber, or similar, projector in an elevated position.
The project requires SIX M5x16mm screws, and one 1/4inch x31 mm screw and nut (or similar).
All parts in white were printed in PLA+ with a 0.6mm nozzle
All parts in orange were printed in TPU
Printer Brand:
Creality
Printer:
CR-10 Mini
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.3 mm
Infill:
20% Triangle
Filament: GST3D PLA+ and TPU White
Notes:
Will need to turn sideways for Ender 3 sized beds. Easily printed on a 300mm bed
1.6mm walls have worked so far, turn your cooling below 70%Good luck!
License:
Creative Commons — Attribution
9
Burns Creative
