Grogu Coaster

10cm in diameter and 3mm thickness (bottom section 1mm, Grogu 1mm and outer ring 1mm)

I printed with 0.4 and 0.8 nozzles

• 0.8 nozzle: layer height at 0.5mm ends up being 6 layers, and 0.8 line thickness. If you want multicolored coaster, change color for Grogu at layer 3 and for outer ring at layer 5
• 0.4 nozzle: layer height at 0.25, line thickness at 0.5. Ends up being 12 layers. If you want multicolored coaster, change color for Grogu at layer 5 and for outer ring at layer 9

I also added a file for the one without runoff, also 3mm thick

Coaster holder bottom part is 1mm thick and the wall is 0.8mm thick, 25mm height 

• 0.8 nozzle: layer height at 0.5mm and line thickness at 0.8mm
•  0.4 nozzle: layer height at 0.25mm and line thickness at 0.4mm