Drawer Dividers - Fits Akro-Mils

These are drawer dividers that fit Akro-Mils. There are many other great designs already but I needed something that fit snugly and conformed to the shape of the drawer so nothing could slip under the dividers. I Have 5 different sizes so far and will add more as I create them. If you have any special configurations you'd like to see let me know in the comments.

Printing

with the exception of the 1 to 2, these do require supports to print. 15% infill is more than strong enough and a layer height of 0.2 works great.

Small Drawer Divider - 1 to 2.stl this is nearly identical to the single divider that comes on the back of the unit. Can be printed flat without supports

Small Drawer Divider - 1 to 3.stl: This can be printed upside down with the widest part on the print bed. Requires supports.

Small Drawer Divider - 1 to 4.stl: This can be printed upside down with the widest part on the print bed. Requires supports.

Small Drawer Divider - 1 to 6.stl: This can be printed upside down with the widest part on the print bed. Requires supports.

Small Drawer Divider - 1 to 8.stl: This can be printed upside down with the widest part on the print bed. Requires supports.

Print Settings

Printer Brand:

Prusa

Printer:

Supports:

Yes

Resolution:

Infill:

15

Category: Tool Holders & Boxes