Magnetic Wall & Belt WD-40 can holder

I always misplaced my WD-40 can while working in the workshop, so I decided to make a dedicated magnetic (and wall mounted) holder for the cans. 

This works with any cans or cylindrical objects which are 7cm (or less) in diameter. 

Hardware:

• 8mm x 3mm magnets (x3 for the single holder, x6 for the double holder)
• 3.5mm screws for mounting the holder on a wall (x2 for single holder, x4 for double holder)

 Print instructions:

Print on the orientation the .stl file already is. No supports required.

BONUS: Now I have added a belt holder version! It should be printed upright, exactly as the .stl already is. This is something I haven’t printed myself, so please post a make if you do :)

BONUS 2: Now I have added a version with a triangular hole for straws! It should be printed lying down, exactly as the .stl already is. No supports required.

Additional note:

You will still misplace your can if you don’t put it back on the holder!