Friction Cam for Virpil WarBRD Joystick

Press Like for encouragement. Comment for improvement.

Specific cam for a Virpil WarBRD joystick that keeps the grip position when released instead of returning to its centre position.
Youtube video of the 2nd version.

Assembly:

1. Remove both cams, the spacers and the extension spring. → Virpil's video on Youtube.
2. Set 2 springs apart for reassembly.
3. Assemble the 3D-printed parts and the springs.
4. Install the assembly inside the base in place of the cams.

Notes:

• You will need to raise the base by 3mm (2 washer) from the bottom plate.
• The rubber shroud of the base acts like a spring. I replaced it with a fabric shroud.