USB Powered Fan

I 3D Printed this fan using my Anycubic Vyper, it took about 10 hours to print all the parts.

All the parts where printed with 0,15-0,2 mm Layerheights, 25% Infill, 45-55 mm/s.

The fan is fully 3D Printed but I also used bolts, nuts and electronics:

• 4x M2x8 Bolt
• 2x M2 Nut
• 4x M5x16 Hex Bolt
• 2x M5x20 Hex Bolt
• 6x M6 Nut
• Electromotor: https://www.sol-expert-group.de/1zu87modellbau/Motor-und-Getriebe/Motoren/Solar-und-Leichtlaufmotor-RF300CAS-Achswellenlaenge-10-mm-lang::720.html
• USB Module: https://www.gotron.be/usb-type-a-kabel-1.html
• Mini Slide switch: https://www.gotron.be/schuifschakelaar-enkelpolig-on-on-spdt-0-5a-12v.html
• Electrical wire: https://www.conrad.nl/nl/p/tru-components-1565382-schakeldraad-yv-1-x-0-20-mm-grijs-50-m-1565382.html

I made a DIY video on my youtube channel Creative 3D Printing: