June 27, 2022
Description
Since i have small children i looked around for a protection case for the Apple TV remote, but the ones that protected the remote was interfering with the touchpad so i made my own.
Made the model in Fusion 360.
It require some double sided tape that goes in the recess.
I printed mine with TPU, orientation is charging port face down.
Print settings:
240C Nozzle, no bedheat, 0.4 nozzle , 0.2 layer, 4 walls, 5top/bottom, 0 infill, gapfill the first 4 layers, no z-hop, 0 retraction, single perimeter loop.
License:
Creative Commons — Public Domain
9
xp1ratex
