Squirt V2 85mm Ducts!

I decided that I wasn't getting enough performance out of my Squirt V2 and a bad crash broke the duct holder off of the frame. This was when I figured 'hey, lets go for it!'

So here it is!! the 85mm ducts for the Squirt V2... some points: this will not fit to the standard frame, the 'SquirtLegExtn' files will need to be printed in ABS and the existing duct holders cut off and filed round, new propellers will have to be cut at 84mm, I am not to be held accountable if you cut your frame up wrong!

Files:

SquirtFrameV3 is the carbon frame with the correct length duct supports if you can machine carbon fibre

SquirtFrameDuct is the original 75mm duct but I remodelled it because the one provided by shendrones seems to be really low resolution.... these have much cleaner radii

I've also included some Gopro mounts for 15,17.5 and 20 degrees for the faster speeds you'll be hitting with the extra thrust!!

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Yes

Supports:

Resolution:

0.2mm

Infill:

Filament: SainSmart TPU 95A

Notes:

Category: R/C Vehicles