Phase 3 Clone Trooper Triton Squad V2 belt with boxes (The Force Unleashed) 1:12 , 1:6 and 1:1 scale

UPDATE: added scaled versions in 1:12, 1:6 and 1:1 scale.

Hi, absolute 3D model making noob here, I have here a new (not remixed like my old one) bespoke version of my phase 3 trooper belt made to specifically fit my armour models.

This version is with boxes pre-attached and is designed in 2 parts and they can, if preferred, be glued to the belly and lower back plates for simplicity. The cut out areas on the sides of the belt front are to allow fabric to be looped on for attaching the large side boxes. There are corresponding indentations on the sides of the updated v2 belly plate to allow for the fabric to go around the belt while still fitting snugly. This in theory should allow the large boxes to move and lift a little so they do not hinder articulation. I have left the old remixed belt up on my page as some may prefer it over my newer one.

I also made separate versions of the boxes and belt parts which should be ideal for cosplay use as they will allow for more adjustment options.

Since I am still a beginner using Fusion360 my models may not be 100% perfect. I also keep my older version models up on the page, feel free to choose the version that best suits your needs and remix if you see anything that needs improving!

I have done my best with my incredibly limited skills to make the parts as accurate as possible (it has been difficult since the game models warp and stretch depending on the scene so I got it as close as possible to what I think was intended).

I have not test printed any of my models as having a baby in the room means I need to avoid resin fumes for safety (no printing for me for a while).

=====================================================================

The recipe so far for a Phase 3 Clone from the Force Unleased:

Chest, upper back, biceps, elbows, forearms, hands, thighs, shins, feet, thermal detonator: Standard phase 1/2 clone.

Butt plate (and shoulder ammo pouches if officer): Stormtrooper/Sandtrooper.

Right knee, left knee, belt, belly/abs, codpiece, shoulders and helmet (Pauldron and backpack if officer): Unique to Phase 3 Clone.

Lower back: You can use either my purpose made one or a Stormtrooper one.

=====================================================================

My page has the belt, codpiece, shoulder, right knee, left knee, belly/abs and lower back.

Phase 3 helmet is available from the following:

1:1 scale: https://www.whitearmor.net/forum/topic/44539-force-unleashed-phase-iii-stormclone-armor/page/3/

1:12 scale: https://www.thingiverse.com/thing:5321114

The Phase 3 officer backpack and shoulder pauldron can both be acquired via Skylu3D's CGtrader store (the Imperial Navy Commando Officer uses them both)

The Stormtrooper armour parts can acquired from Mave3Dprints (Mike Küffner) here on Thingiverse: https://www.thingiverse.com/thing:4667682

The Clone armour parts needed can be acquired from Woyta94 (Vojtech Masek) here on Thingiverse: https://www.thingiverse.com/thing:3593888

Category: Props