February 22, 2020
Description
The Wheels of our IKEA Dishwasher are worn out and the Busket derail often.
The first attempt with PETG was not as good, after one run the Wheels wasn't round ;-)
The next attempt and my recommendation is to use ASA for the Parts. All fine after several runs. PC would be the best solution !
The little support cylinder on the Wheelhole is to break of to print the Wheels supportless.
Use ASA, PC or an other temperature resistant material.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
KalleKnall
