Electrical Compressor

Disclaimer:

Due to the recent incidents (things appearing on ebay) I just want to make something very clear:

I do not allow any commercial use of my STL-files, my designs and my photos!

Description:

Maybe some of you remember my compressor wheel? http://www.thingiverse.com/thing:53455

Nice to print but pretty much useless without a casing. So... I made a casing.

All you need is a motor and a battery. The backplate is designed to match a motor from an 1:18 RC model car (LRP Fusion Micro Modified 370). Hook it up to a battery and enjoy fresh, compressed air.

The compressor wheel has to spin clockwise.

Here is a video showing the compressor at work: http://youtu.be/LF_rRPDeT54

EDIT:

I uploaded some models that are laying flat.

Instructions

Print all three parts. You might want to use support for the compressor.

Bolt the motor to the blackplate and press-on the compressor wheel to the motor shaft.

Bolt the backplate to the compressor. The holes are designed for M2x8 bolts.

Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.