January 16, 2023
Description
Print with backside down TPU at 120 or 200um layer height. The infill can vary depending on how flexible you want the case to be. Ex. 20% is very flexible and easy to insert, and 100% is much stiffer.
Overture TPU worked well. Print on a textured sheet or blue painter's tape for a nice grippy texture on the backside.
Phone should slide right in if you've printed it correctly:
Original post on Thingiverse is linked for reference.
https://www.thingiverse.com/thing:4406119
License:
Creative Commons — Attribution
Daniel Schultze
