RatRig V-Core 3 OpenFront Euclid Probe Dock

Please note that according to the CAD model this won't work with V-Core 3.1 because there isn't enough clearance to the lead screw holder next to it. I may adapt it when I update to 3.1 or you just grab the .step and do it yourself.

I use the MFBS openfront mod which utilizes two aluminium plates. You may adapt or use it for other openfront variants but that is the one I tested.

You will need M6x45mm screws for the left stationary block as they have to go through it and into two M6 hex lock nuts which are put into the bottom of the printed part. Please take a look at the pictures.