July 9, 2022
Description
I wanted an enclosure for my sonoff boards that had a better way to secure the cables, and allow me to keep the ground wire. As I use these to control the power to my 3D printers from my smart home server.
You will need -
2 small zip ties (I used 4")
2 M3 X 12 screws, I used these screws
Printer:
Anet A8
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
30%
Notes:
You do not need supports for the screw holes, There are two layers that print in the top files in the screw holes that will support the smaller layers for the threads of the screw. This should be easy to break through with a little pressure from a screw and a screwdriver.
License:
Creative Commons — Attribution
9
Dan Rogers
