April 1, 2023
Description
Printed with PLA, without support. Z=0,3 20% infill
Add peace of plastic bag. The best one is tiny bag in which Prusa send parts.
You can add endless multipart to the BloWer main and get deeper voice.
You can remove and add parts and get different sounds and play music.
Build instructions:
Take BloWer Main and put on it one layer of plastic bag.
Cover it with BloWer Ring
And Push it down
Remove ring and cut bag on the edges you see that are folded. Diamter should be around 90mm
The plastic bag should be tense.
Add many multiparts you wish on the other side of Blower Main part.
W
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
7
Wilko_SLO
