Klemco and TH3D Multi Mount Part cooling fan (hero remix)

This is a quick remix I did for my CR10-V3 for part cooling with my Klemco mount as I found the already avalible mounts from Klemco to be insufficient for what I needed as I needed cooling from both sides with minimal hardware.

This is the first revision I made and it turned out way better than I thought it would.

For spacing and mounting you'll want to bring the nozzle to the bed and use a ~2mm spacer (Like the stock nozzle wrench for most printers) under the fan duct to get the right mounting height. And it should mount via M3 bolts, I do not recall the length needed.

Happy printing and tell me how you like it and how it works out for you.

EDIT: This appears to also be compatible with the TH3D Multi Mount as that is basically a direct copy of the Klemco mount.

This is a remix of these 2 items.

HeroMe gen 5: https://www.thingiverse.com/thing:5210744

Klemco Part Cooling Fan: https://www.thingiverse.com/thing:4555858