August 7, 2022
Description
Did a remodel of the LGX 2-part adapterplate since i didnt like the screws going from behind, (behind the cablechain) and they vibrated loose after 1-2 rolls of filament.
Removed the e3d fastener in the bottom, removed the old AB ducts, removed the 2-part design, added fastener from the front (requires M3x45, m3 nut and new x-carriage), added clearence to both the toolhead screws and the upper carriage screws, redid the holes so its printable (no chamfers), made a MGN 12 carriage for both original and euclid.
Made in fusion 360, credits to the original Voron team.
Printsettings:
4walls, 5 top/bottom, 40% grid infill, 0.2 layer, 0.4 width, no support.
Update 220807: Made the holes for the M3x45mm screws 1.5mm deeper.
License:
Creative Commons — Public Domain
7
xp1ratex
