Dust Collection System Gate 1

This is a gate for dust collection system. It has 2" PVC going in and a 2" vacuum hose going out. It has mounting holes to prevent the movement of opening and closing from putting stress on the piping and it has a radius to sit up against the pipe behind it. It comes off my Vac 1 coupler. I did notice a problem with it as the gate wants to close with the system on. The space for the gate is a little looser than my others. I am not sure if this was in my model ( I don't think so) or if its do to printing the top part (green part) with a .6 nozzle instead of the .4 I normally use I have noticed that that changes tolerances on other things. 

If you use my G-code take note that the top part is with a .6 nozzle the other 2 parts are a .4 nozzle.

Also I did not give a G-code for the slide as I printed it with something else.