January 6, 2026
Description
A strong mount to attach Velcro / hook and loop loops and straps to IKEA SKÅDIS pegboards. It is a remix of the Velcro Clip by Pavel Riedl that has been adapted to work with Skadis T-Nuts for easy and secure installation on Skadis pegboards.
Works with cinch straps as well as velcro tape from a roll.
Read more about the Skadis T-Nuts Mounting System and check out the Skadis T-Nuts Collection for more Skadis accessories that use T-Nuts. |
Qty | Description | Sourcing |
|---|---|---|
1 | M2.5x12mm (or longer) Socket Head Cap Screw | |
1 | M2.5 DIN934 Hex Nut |
Qty | Part | Download |
|---|---|---|
1 | Velcro Mount (choose size and orientation) | this project |
1 | Skadis T-Nut M2.5 |
Files are available in the most common metric and imperial sizes and in vertical or horizontal orientation.
File | Orientation | Velcro Width |
|---|---|---|
Velcro Mount Vertical 8mm.stl | Vertical | 8mm |
Velcro Mount Vertical 10mm.stl | Vertical | 10mm |
Velcro Mount Vertical 12.5mm.stl | Vertical | 12.5mm |
Velcro Mount Vertical 15mm.stl | Vertical | 15mm |
Velcro Mount Vertical 16mm.stl | Vertical | 16mm |
Velcro Mount Vertical 20mm.stl | Vertical | 20mm |
Velcro Mount Vertical 25mm.stl | Vertical | 25mm |
Velcro Mount Vertical 30mm.stl | Vertical | 30mm |
Velcro Mount Vertical 50mm.stl | Vertical | 50mm |
Velcro Mount Horizontal 8mm.stl | Horizontal | 8mm |
Velcro Mount Horizontal 10mm.stl | Horizontal | 10mm |
Velcro Mount Horizontal 12.5mm.stl | Horizontal | 12.5mm |
Velcro Mount Horizontal 15mm.stl | Horizontal | 15mm |
Velcro Mount Horizontal 16mm.stl | Horizontal | 16mm |
Velcro Mount Horizontal 20mm.stl | Horizontal | 20mm |
Velcro Mount Horizontal 25mm.stl | Horizontal | 25mm |
Velcro Mount Horizontal 30mm.stl | Horizontal | 30mm |
Velcro Mount Horizontal 50mm.stl | Horizontal | 50mm |
File | Orientation | Velcro Width |
|---|---|---|
Velcro Mount Vertical 1_2in.stl | Vertical | ½ inch |
Velcro Mount Vertical 5_8in.stl | Vertical | 5/8 inch |
Velcro Mount Vertical 3_4in.stl | Vertical | ¾ inch |
Velcro Mount Vertical 1in.stl | Vertical | 1 inch |
Velcro Mount Vertical 1.5in.stl | Vertical | 1 ½ inch |
Velcro Mount Vertical 2in.stl | Vertical | 2 inch |
Velcro Mount Horizontal 1_2in.stl | Horizontal | ½ inch |
Velcro Mount Horizontal 5_8in.stl | Horizontal | 5/8 inch |
Velcro Mount Horizontal 3_4in.stl | Horizontal | ¾ inch |
Velcro Mount Horizontal 1in.stl | Horizontal | 1 inch |
Velcro Mount Horizontal 1.5in.stl | Horizontal | 1 ½ inch |
Velcro Mount Horizontal 2in.stl | Horizontal | 2 inch |
Print the parts in the original orientation. All STL files are pre-rotated.
Material: PLA, PETG, pretty much anything
Layer height: 0.2mm
Extrusion width: 0.4mm
Perimeters: 7 (important for super strength)
Infill: 0% / doesn't matter
Insert the M2.5 nut into the Skadis T-Nut.
Stick the M2.5x12mm screw through the Velcro Mount.
Thread the T-Nut onto the screw and leave it loose so that the T-Nut can freely rotate.
Position the T-Nut in the vertical orientation and stick the T-Nut through the Skadis peg board.
Us the alignment guides on the back of the mount to align the part in the center of the peg board hole.
Tighten the screw. The T-Nut will orient itself in the horizontal position and provide a very secure hold.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
6d6178
