Most unlucky knife holder

I use a lot of these very sharp 80mm knives  in my kitchen and you need a lot of attention if you want to get them out of the drawer…

So i thought it might be better to store them in a different place and what better holder than this one for these dangerous knifes... ;-)

The holder can be placed flat or standing on your kitchen working desk. 

The holes are open in the bottom too to be able to clean them from time to time more easy.

The size of the holes is: 88mm in depth, 1.3mm in width and 15mm in height.

Printing instructions:

• 0.3 speed profile 
• 10% infill
• Brim set to 5mm
• No supports needed
• Color change for the contrast color set with the automatic color change detection in Prusa Slicer

Happy printing :)