July 16, 2022
Description
First ever case for the digipi. This is a work in progress and I am open to ideas for changes. This case was made for the audio injector board with room for a PTT circuit.
All holes are for M3 screws and designed to be self tapped by driving the screw in to allow it to cut its own threads.
Connector used is a RC servo style or JST SM 5 Pin connector. Only using 4 pins, just using 5 for alignment.
Printed at .3mm layer height at 100mm/s Because I was prototyping.
Would be really nice at a smaller layer height and slower speed.
Didn't need any supports
License:
Creative Commons — Public Domain
jameslee
