July 17, 2022
Description
This mounting bracket can be used to mount a Mean Well ELP-75-5-C 75 Watt power supply in one slot of the 2U rack mount system described by Krapozok (https://www.thingiverse.com/thing:1793758).
The ELP-75-5-C is the same as the ELP-75-5 but with a protective cover, so it is advisable to use the -C version.
The mount has a front plate that allows for good ventilation and a slot that can be used as a strain relieve for the power cord.
The following hardware is needed:
2 M3x10mm screws to mount the front panel to the mount
4 M3x6mm screws to mount the power supply to the mounting bracket
1 M3x8mm countersunk screw and M3 nut to mount the power supply to the frame of the rack mount
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
50%
Filament: DasFilament HIPS Black
Notes:
Use a filament material like ABS, HIPS or similar that is stable at the temperature produced by the power supply on its metal shield.
License:
Creative Commons — Attribution
9
reibuehl
