Inserts for Dremel EZ SpeedClic Box (SC725)

After getting a Dremel EZ SpeedClic Assortment Box (SC725), I was surprised to see how much space is wasted in that box. All parts are presented in plastic molds that push the content up and leave vast amounts of unused and inaccessible space beneath them. To fix this, I designed these three inserts that helped me to free up one compartment totally and still have plenty of space for larger amounts of the items stored in the other compartments.

Print Settings

Printer Brand:

Ultimaker

Printer:

Rafts:

No

Supports:

Resolution:

0.2 mm

Infill:

Filament: DasFilament PLA Black Post-Printing =============

The inserts have cutouts for the four walls that protrude into each compartment but the box also has four smaller snaps sticking into each compartment that you might have to cut flush to get the inserts into the compartments without bending or breaking them.

The holes for the tool holders should be bIg enough but if your print has too tight tolerances, you can enlarge them with a 3.5mm drill.

Category: Tool Holders & Boxes