July 17, 2022
Description
I needed a water drainage system into the gutter for my Lechuza balcony planters. Since there is nothing to buy for this I have constructed an adapter for the hose from Gardena MicroDrip System.
I parameterized the hose connection with 80% infill and Honeycomb pattern. The thread insert with 60% infill and also Honeycomb. The remaining part with 15% Infill Gyroid.
I recommend in any case to print the hose connection with a high infill because otherwise it breaks off quickly.
Other
Since it is for outdoor use and requires a certain material hardness I printed it with PETG and a layer height of 0.1.
Please print with thread down and support.
As a seal, I printed a ring of TPU.
This is a modification with better stability and assembling corners from:
License:
Creative Commons — Attribution — Noncommercial
MAM3D
