Nobara's Hammer - Jujutsu Kaisen

Nobara's Hammer from Jujutsu Kaisen

Designed more as a cosplay prop than a decoration. The hammer is split into multiple parts for ease of printing and/or painting. Assembly WILL require glue/epoxy and sanding of connecting parts for better adhesion/fit. Each part has a small tolerance but it may be too small depending on the precision of your printer.  

The head is two parts, secured by a pin. There's an optional separate heart you can press in if you do not have MMU, or if you do not wish to mask the area off for painting.

The handle slides into the “handle mount” and the handle mount slides into the assembled head. 

The attached G-Code is mostly just for reference. The handle and the handle connector are best printed upside down (for assembly: the rounded side of the handle is the bottom). I have also enabled ironing for the smaller parts (head pin, handle connector, and heart).

Print at the highest infill you desire, but a minimum of 30% (4 perimeters) for the handle.