Materials Needed
- (1) 19 x 12.5x 11mm Boat Rocker Switch (what I used)
- (1) JST XH-4A (mine came from this set. you can find them cheaper alone)
- (4) 3MM x 6mm Socket Head Screws (lid is reversible with a flat side for socket/flat head screws & an inset side for flush mount).
- (optional) a bit of PCB Prototype Board to solder the JST to (I used a bit of one of these).
- You will also need soldering materials and some wire if your JSTs are not the pre-soldered to wires type
Option 1: 1 JST slot and 1 3mm(ish) wire slot
Options 2: 2 JST Slots
License:
Creative Commons — Attribution — Share Alike
RyanGuy
