July 18, 2022
Description
I printed with supports and blocked out the mounting holes. I needed to ream out the bowden tube hole but after 6 iterations, it lines up with the stock extruder nicely. I mounted the extruders to the base, then mounted it on the x carriage. I put 30mm long capricorn tubing in the extruders before slipping the hot end on and securing it.
This is the extruder-motor combo:
https://www.bondtech.se/product/lgx-lite-large-gears-extruder/
License:
Creative Commons — Attribution
7
NoahLikeTheArk
