Squash anti vibration foot

Anti vibration foot based on standard 40 mm squash ball.

It can be mounted with one or two bolts to any alu profile.

It lifts printer up by around 45 mm.

Print settings:

• filament:PETG (don't use PLA, it will deform over time under mechanical stress)
• layer height: 0.2 - 0.3
• line width: 0.4 mm
• wall line count: 2
• top/bottom layers: 3
• infill: 20%

Hardware (per one foot):

• bolt M4x10 or M3x10 x1-2
• T-nut M4 or M3 x1-2

If you miss all-metal T-nuts here're replacements:

• M3: https://www.thingiverse.com/thing:3050607
• 4-40: https://www.thingiverse.com/thing:3366563

Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs

Category: 3D Printer Parts