Sharkie Universal Calibration Tower

Universal calibration tower stylized on shark fish :)

Updates:

• Released v1.8, exactly the same as v1.7 except for no 'B 5' embossed text on the side.

I'd love to see your make - please publish :) Consider a tip if you like my work :)

Can be user to test/calibrate:

1. Overhang on straight and curved walls (jaws and tail 50/60/70 deg)
2. Retraction / stringing
3. Bridging on straight and curved area (inside top)
4. Cooling (cone inside jaws)
5. Filling flat and curved surfaces (inside bottom, jaws)
6. Dimension accuracy (eyes - 2 mm, column - 4 mm, tail - 0.8/1.6 mm)
7. Ringing (indented letters on the side)
8. Sharp edges (side jaws)

Designed in 10 mm segments and optimized for printing at 0.2 mm.

Single sharks after all could be used as toys for children :)

Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs

Category: 3D Printing Tests