July 18, 2022
Description
T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for#4-40 x 3/16'' (width) x 1/16'' (height)'' nut.
It's a remix of my M3 T-nut for those who may not have Metric nuts and bolts: https://www.thingiverse.com/thing:3050607
Fits for most of the printers based on V-Slot, e.g. Creality (CR-10, Ender 3, Ender 5), Tevo (Tarantula, Tornado), Tronxy (X1, X3, X5S) and many more.
Put it in the profile slot and turn the bolt - it will turn and find its locking position.
Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Any PETG / ABS Any
Notes:
Print very slow around 10 mm/s with a little (if single nut) or no cooling (batch) ideally with PETG or ABS, as those are not so brittle as PLA.
For best results and strength set in Cura:Top Layers: 1000
Bottom Layers: 0
Top/Bottom Pattern: Concentric
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
DaVinci2000
