July 18, 2022
Description
A bag holder / hook for Valco Baby Snap 4 stroller. Although it has quite capacious basket it's sometimes not enough to carry all the shopping bags. The hook comes in handy.
It may be suitable for other models of Valco Baby strollers.
I haven't tested it thoroughly, however with the recommended infill % it can withstand at least 10 kg / 20 lbs of weight.
There are two versions, to hang on the left and right side of the stroller.
UPDATE:
A new version v2 is available, a bit thicker and with rounded edges.
A new version v3 is available, even more thinker, with wider hook entry.
Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs
Printer Brand:
RepRap
Printer:
XYZprinting da Vinci 1.0A
Rafts:
Yes
Supports:
No
Resolution:
0.3 mm
Infill:
50% or more
Notes:
I printed the hook in PLA (semi white) and ABS (pink). For ABS use raft. I recommend infill at least 50% and honeycomb pattern.
Finishing
After printing you could sand the edges, especially where a bag is being hanged.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
DaVinci2000
