Cat "proof" Succulent Pot

Cat owners know the pain of having to keep cleaning up after their cat decided to clear off the shelf. After sweeping up soil from the floor one too many times I decided to design this two part pot to keep my plants safe.

It was designed to take a 80mm tall, 100mm top diameter, 80mm bottom diameter plastic pot to keep things hassle free, after all that is why one usually gets a succulent in the first place.

I have designed two separate bases, one with seven 26 diameter by 11mm deep pockets to load up with the weights of your choice, low denomination coins were my choice of filler.

I have also designed a second option with a tie down point that can be used to zip tie the pot down if you have a place to do so. in either case, the pot slots into the base with a 0,15mm tolerance to locate them together and can be secured with a dab of super glue when finished.

All parts were printed with a 0,6mm nozzle at 0,3mm layer height on my Ender 5 Plus in marble PLA with no supports needed for any of the parts.