July 23, 2022
Description
3D MODEL DESCRIPTION
Inspired by the chain mechanism on bicycles, I decided to have a go at creating one that could be 3D printed. This is the result, requiring no support, and featuring a print-in-place chain without any end-links.
In the beginning the chain will be a bit tight, but it will fit if you stretch it a bit, and it will wear itself in with time.
Good luck printing it, and hope you have fun with it :)
3D PRINTING SETTINGS
Filament: PLA 1.75mm wide
Nozzle: 0.4mm
Nozzle temp: 210c
Bed temp: 50c
Layer Height: 0.18mm
Print time: around 5h 30 min to print all the parts
Support: No support needed
Printer: FlashForge Adventurer 3
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Materialistic_3D
