Jet card wallet

I wanted to add something new to card wallets collection, so I came up with aircraft inspired gadget, perfect for avionics enthusiast.
L shapes on front and on the ends of wings holds cards in place. There is spring-loaded lock for securing card in place.
I printed little jets with PLA and PETG filaments. Both works great, PLA is more stiffer, but PETG has better temperature resistant. Basically, try your favourite filaments!

For the best results, I recommend placing model on 60 degree angle, like in the picture bellow:

Disclaimer:
I'm not responsible for your prints, especially when you lost your credit cards or IDs.
You are using it at your own risk!